Field testing for ballast condition assessment, new rail track construction, maintenance / remediation and asset management
Insitu Test are going to be at CORE2018, Conference on Railway Excellence.
We are field test equipment specialists for railway trackbeds, covering ballast condition assessment, soil investigation and characterisation, geotechnical drilling and compaction control.
Our equipment is used for new rail track construction, maintenance / remediation and asset management purposes.
Our products enable better field-testing outcomes compared to the current traditional methods (faster, more accurate, more representative, providing better insight, without errors, immediate GPS located results that are visually presented, more cost effective etc).
CORE2018 is organised by the Railway Technical Society of Australasia (RTSA).
Come and see us at Stand 51 next to the coffee cart. We’d love to see you there.
The ZFG 3000 is an excellent tool and should be included in any professional contractors equipment list of assets. This tool should have a similar impact on the construction industry as the laser level. The ability to accurately and reliably measure this aspect of ground condition will improve the quality of the work and remove doubt as to the progress of the project.
I bought my ZFG 3000 and on the same day less than two hours later, it had paid for itself. Using this instrument, I was able to demonstrate scientifically, repeatably and independently the quality of the work that we had completed for our client. Ending the disagreement and creating an improved working relationship. Most jobs are not as confrontational as this was however, most jobs are built to a standard. The contractor can now measure as required, to know on site, at the time of testing if this standard is being achieved.
I strongly recommend the ZFG 3000 Deflectometer to any earthmoving, civil construction contractor. Good luck with your projects.
If your after sales service is anything like what I have already received, I think I definitely made the correct choice.
We are using the PANDITO DCP for Level 1 site supervision, it’s very portable and we find it handy for flying into sites.
Insitutek Blogs
On 2 August 2024, geomechanics professionals gathered in Canberra for the Australian Geomechanics Society ACT Insitu Testing Practical Workshop. The event focused on practical demonstrations of key insitu testing methods, including Cone Penetration Testing (CPT), Static Plate Load Test (PLT), Dynamic Probing Super Heavy (DPSH), Light Weight […]
Have you ever wished your Plate Load Test equipment would operate itself? Then our static plate load test with automatically operating battery hydraulic pump is definitely something for you. 🙂 Typically, a hydraulic hand pump is used to apply 15 to 20 load increments over two loading cycles by the operator. One test lasts 20-30 […]
We want to share details of a practical AGS Insitu Testing workshop on 2 August, share something for those working on slope stability and for those in land development and tip you off on getting early bird prices for a couple of up-coming conferences in Australia. If you are interested in modern insitu testing methods […]