WebSprint Software – Learn from the Best at Sol Solution (for PANDA Instrumented DCP, GRIZZLY DPSH, eKODIAK DCP and others)

Jan 19, 2023 | Bearing Capacity, Compaction Control, Geotechnical Drilling, Insitutek, Rail Formation & Ballast Condition Assessment, Soil & Site Investigation

Learn from the best at Sol Solution about the WebSprint Software for the PANDA Instrumented DCP (VEDP)GRIZZLY Dynamic Probing Super Heavy (DPSH)eKODIAK Multi Mass Automated DCP and others.

Here is the agenda for the session:

Insitutek welcome – 5 min

WebSprint Software presentation by Sol Solution – 45-50min

DataSprint presentation

  • Integration PANDA®, GRIZZLY®, eKODIAK®, deflectometers, others tests data
    • Compaction control and soil investigation data for PANDA® and GRIZZLY®
    • Acceptable and non-acceptable data for compaction control
  • Sounding integration with USB stick, WS connect, Sol Solution DCP
  • Logos integration
  • Maps integration
  • Pictures integration
  • Annexes integration
  • Mechanical sounding creation
  • Calibration certificate integration for Panda® and Grizzly®
  • Presentation location and sounding displacement

MineSprint presentation

  • Compaction control presentation
    • Backfill section creation – adapted to your classification
    • Backfill section share
    • Automatic report creation
    • Maps
    • Pictures
    • Calibration certificate
    • Annexes
  • Soil investigation presentation
    • Geology profile creation
    • Bearing capacity estimation presentation
    • Automatic report creation
  • Correlation presentation
    • Assistance document presentation
    • Use of existing correlation
    • Correlation creation
  • Future modules introduction
    • Liquefaction
    • Foundation

Questions – Insitutek and Sol Solution – 10min

The session is being held on Thu 2nd Feb 2023, 3:00 pm – 4:05 pm AEST. Get your free tickets here:


Feel free to share this invitation with your colleagues. We look forward to seeing you on the inside.

Our Plate Load equipment is getting a lot of use. We’re very happy with it. 🙂

Mary Flux

Director & Engineering Geologist, WANT Geotechnics

The ZFG 3000 is an excellent tool and should be included in any professional contractors equipment list of assets. This tool should have a similar impact on the construction industry as the laser level. The ability to accurately and reliably measure this aspect of ground condition will improve the quality of the work and remove doubt as to the progress of the project.

I bought my ZFG 3000 and on the same day less than two hours later, it had paid for itself. Using this instrument, I was able to demonstrate scientifically, repeatably and independently the quality of the work that we had completed for our client. Ending the disagreement and creating an improved working relationship. Most jobs are not as confrontational as this was however, most jobs are built to a standard. The contractor can now measure as required, to know on site, at the time of testing if this standard is being achieved.

I strongly recommend the ZFG 3000 Deflectometer to any earthmoving, civil construction contractor. Good luck with your projects.

Jim Bassett

Managing Director, Bassearth Pty Ltd

I felt the training was very thorough. If anyone doesn’t know how to use a PANDA after that session, they shouldn’t be using one at all.

Sam Bamford

Laboratory Division Manager, Protest Engineering

Insitutek Blogs

We find clients are often looking for ways to improve geotechnical testing outcomes and do it more efficiently at the same time. This drives their buying decision making. Australian Soil and Concrete Testing (ASCT) was a case in point when they were searching for Plate Load Test equipment for their upcoming Collector Wind Farm project. Some of the things that motivated them include: […]

We are excited to introduce the addition of a new Liquefaction Risk Estimation module in WebSprint©. Paired with our cutting-edge products, PANDA® and GRIZZLY®, this module enables you to assess the liquefaction risk of soils exposed to seismic stress. PANDA® Instrumented DCP: This cutting-edge tool provides dynamic penetrometer soundings, delivering precise data crucial for seismic risk evaluations. GRIZZLY® […]

The Australian Geomechanics Society is gearing up for a series of geotechnical events across VIC, WA, NSW, and SA-NT. We are thrilled to inform you that we will be sponsoring and attending these exciting geotechnical events, and we would love for you to join us. It’s a fantastic opportunity to catch up, explore our booth (VIC), and stay informed about […]